Silica gel products manufacturers produce various silica gel products, according to customer requirements and various functions of silica gel, they can produce different siliicone products for consumers to use. So what problems silicone manufacturers should care in production?
1. Production of silicon products as far as possible to avoid any kind of strong acid and alkali chemicals
Silicone rubber is a kind of highly active adsorption base, insoluble in water and any solvent, non-toxic and tasteless, stable chemical properties. Except strong alkali, strong acid, it does not react with any substance. Chemical changes will occur under strong acid and base, so try to avoid this kind of strong acid and base chemicals in the process of use. Various types of silica gel form different micropore structures because of their different manufacturing methods.
2. Silica gel products are difficult to replace the chemical composition and physical structure of the characteristic silica gel, which determines that it has unique perperty that many other similar material is difficult to replace its characteristics: high adsorption function, good thermal stability, stable chemical properties, high mechanical strength, etc. According to its pore size, silicone is divided into: large pore silica gel, coarse pore silica gel, B type silica gel, fine pore silica gel.
3. Produce silica gel products for isolation and protection. The most obvious characteristic of silica gel is adsorption, which is mainly the air charged dust or some dust adsorption to the appearance, causing the appearance very dirty. In view of this feature, in the process of production, factory must implement silicone isolation protection from the rubber mixing stage, use of transparent rubber paper to pave its surface. In this way, whether the material is still in the process of loading with dust or ash, will not contact the appearance of silica gel raw materials, so as to produce a variety of silica gel products with more cleaness.
Post time: Nov-28-2022